Medical Incinerator, Animal Cremation, Waste Incinerator
Sprinkler system, Heat
Capacity: 50/100/150/200/300kgs per hour
This incinerator is mainly used for industrial waste, paint residue,
garbage, medical waste and port waste disposal. Installation of a heat
exchange system can handle the burning of waste heat into hot water or
hot air to effective use, do both. The furnace using ceramic fiber
as the main light insulation, the heat recovery effect more fully.
1. Ceramic fiber furnace insulation structure, with less heat
absorption, heating speed, effective insulation, energy-saving
advantages; the parts are made of high quality raw materials, improve
2. Incinerator inside the maze design, can effectively remove dust, no
external cyclone dust, compact and low cost.
3. The principle of using 3T design, high efficiency, energy saving,
environmental protection; normal burn, the basic need for combustion of
fuel and energy saving.
4. Tuyere arrangement of science, the formation of strong vortex,
burning more fully; extend the flue gas residence time, to ensure the
flue gas treatment effect.
5. May need in the secondary combustion chamber configuration after the
heat exchange system, the high temperature flue gas from 800C ° ~ 1200 C
° down to 200 C ° or so, heat is transferred to the middle of life,
industrial use, thereby saving energy.
6. Can be configured according to different circumstances subsequent
washing device in order to meet the national emission standards.
Principle of work:
The reject invests in a time combustion chamber stove by the artificial
batch intermittence type, carries on the combustion by a combustion
machine ignition, simultaneously, aids combust the air blower to catch a
chill from the different angle to the stove, guarantee waste thorough
combustion; In a combustion chamber stove produces haze and dust after
labyrinth type curtain wall when the massive dusts are asked the price
with no intention of buying, and enters two combustion chamber to carry
on two time high temperature 1100℃ above thermal decomposition not to
burn the cinders except the haze in the free carbon. The high
temperature haze which comes out from two combustion chamber achieves
without the unusual smell, does not have the odor, and the dust quantity
is also low.
Incinerator disposition and major technique parameter
1、the holding furnace body (300mm high quality imported ceramic fiber
cotton insulation layer) set, with the main combustion chamber of a
device, a Vice-chamber devices, maze dust removal system, the ash
2、combustion machine 2 (Sweden Belden)
3、stainless steel exhaust pipe set.
4、an electronic control system.
5、the use of fuel: diesel or gas.
6、a burning temperature: 300 ℃ -800 ℃.
7、 the secondary combustion temperature: 850 ℃ -1100 ℃.
8,、he gas flow lag time: ≥ 2 seconds.
9、the burning hot burning rates of residue: ≤ 5%
The Incinerator selects the disposition
1、Sprinkler system, including spray towers, water pumps, and
pipes, fans, etc.;
2、Heat exchange system, including heat exchangers, pumps, valves,
thermocouples, and pipelines.
incinerator,medical incinerator,hospital incinerator,waste
incinerator,pet cremation,mobile incinerator,biological
incinerator,solid incinerator,small incinerator,Установка для сжигания